Fire Alarm & Sirens

- Compliance: EN54-2 & EN54-4 certified

- Input Voltage: 230VAC ±10%-15%, 50Hz

- Current Consumption: 1A (Typical)

- PSU Output to CIE: 21.5–28.5VDC

- Battery Support: 2 x 12V / 28AH rechargeable lead-acid batteries

- Charge Capacity: Max 1.2A

- Interfaces: USB, RS485, RS232, Ethernet, CAN Bus, Fiber Optic

- Network Capability: Supports up to 512 panels

- Dimensions (L x W x H): 530 x 490 x 135 mm

- Weight: 16.7 kg

- Internal Resistance: Max 1.0Ω

- Battery Model Tested: PS-12280 (LPCB Approved)

- Compliance: EN 54-7:2000 +A1:2002 +A2:2006, LPCB / CE-CPR.

- Operating Voltage: 24 V DC (16 – 28 V DC).

- Current (Standby / Alarm): 0.6 mA / 4 mA.

- Address Range: 1 – 254 (TNA protocol).

- Indicator: Single 360° red LED.

- Material / Finish: ABS, white glossy.

- Dimensions: (Ø × H): 99.7 mm × 57 mm.

- Weight: 145 g (with base) / 90 g (without).

- Operating Temp.: –10 °C to +50 °C.

- Humidity: 0 – 95 % RH, non-condensing.

- Normal Rated Voltage: 24VDC

- Operating Voltage: 9.6VDC to 30VDC

- System Type: Conventional

- Quiescent Current: ≤65uA

- Alarm Current: 18 to 22 mA (typical 20mA)

- Remote LED Drive Current Output: Max. 20mA

- Maximum Air Velocity: 7.6m/s

- Weight: 102g (160g with Base DB-6)

- Operating Temp. Range: -10℃ to +50℃

- Relative Humidity: 95%RH, Non condensing @ 40℃

- Alarm LED Indication: Red (Continuous)

- Normal LED Indication: Green (Blinking)

- Ingress Protection: IP42

- Material of Body: ABS Plastic (To UL94V-0 Flammability Test Standards)

- Colour of Body: White

- Standards: EN54-7

- Price mentioned per piece

Power Supply Voltage: DC 24V (Acceptable Range: 15–28VDC)

Standby Current:＜10.0 mA

Sound Output: 75–105 dB @ 3 meters (escalates in 3–5 seconds)

Flash Frequency: 1.0 Hz – 1.8 Hz

Sound Cycle Duration: 2.5 – 4.5 seconds

Wiring Polarity: Required (polarity-sensitive)

Operating Temperature Range: -10°C to +50°C

Humidity Tolerance: ≤ 95% RH, non-condensing

Material / Color: ABS Plastic / Red or White

Dimensions (with Base): Ø100mm x 44mm (H)

Weight Approx.: 108g (including base)

- Standard Compliance: EN 54-12:2015 (LPCB / CE-CPR Certified)

- Power Rating: 20V to 28V DC

- Current Consumption: Standby: 23mA, Commissioning: 56mA, Alarm: 33mA

- Beam Type Reflective: Infrared with Laser Pointer

- Alignment Guide: Laser Beam & Nixie Tube Digital Display

- LED Indicators: Red (Fire), Yellow (Fault), Green (Alignment)

- Material / Color: ABS Plastic / White

- Dimensions: 190.87mm (L) × 126.87mm (W) × 91.96mm (H)

- Weight: 0.13 kg (Detector Only), 440g (With Base)

- Operating Temperature: -10°C to +50°C

- Humidity Range: 0% to 95% RH (Non-condensing)

- Ingress Protection: IP30 (Optional IP66 with glue seal – not EN54-12 approved)

- Compliance: EN 54-11:2001 + A1:2005

- Certifications: LPCB / CE-CPR

- Input Voltage: 24VDC (Range: 16V – 28V)

- Current Consumption: Standby: 0.6 mA / Alarm: 1.8 mA

- Protocol / Addressing: T&A, Range: 1 to 254

- Indicator: Front-Facing LED (Steady On when pressed)

- Glass Type: Non-breakable (No hammer required)

- Material / Finish: Fireproof ABS / Red Glossy

- Mounting: Surface Mount, Type A (Indoor Use)

- Dimensions: 99.7 mm × 57 mm

- Weight: 145 g (with base) / 90 g (without base)

- Operating Temperature: –10 °C to +50 °C

- Ingress Protection: IP43

- Humidity Range: 0 – 95% RH (Non-condensing)