Security
Heavy Duty Fibre Insulated Welding Electrode Holder
- Rated Current: 300 A – 800 A.
- Size: 6.35 mm (300 A) – 9.5 mm (500 A).
- Insulation: Fiberglass-reinforced body (high dielectric strength).
- Length: 260 – 300 mm (approx. 260 mm for 800 A).
- Weight: ~0.68 kg (600 A model).
- Certification: CE-approved models available.
Super Scanner Hand Held Metal Detector Portable Security Inspection Device
- Product Name: Super Scanner Hand-Held Metal Detector.
- Power Voltage: 9V (standard or rechargeable battery).
- Battery: 1 × 9V (battery not included).
- Power Consumption: 270 mW.
- Operating Frequency: 22 kHz.
- Operating Current: < 50 mA.
- Operating Voltage: 7–9 V.
- Detection Modes: Audio & vibration.
- Sensitivity Control: Low & optimum sensitivity switch.
- Indicators: LED (green / red).
- Operating Temperature: –5 °C to +55 °C.
- Net Weight: 230 g.
- Dimensions: 41 × 8.5 × 4.5 cm.
GC 101H Handheld Metal Detector High Sensitivity Security Scanner
- Model: GC‑101H Hand Held Metal Detector.
- Material: ABS plastic housing.
- Power Supply: 9V battery.
- Alert Modes: Audio (buzzer) & vibration with LED lights.
- Dimensions: Approx. 375 × 77 × 26 mm.
- Weight: 225 g (without battery).
- Operating Temp: −15 °C to +45 °C.
- Color: Grey.
- Battery: Not included.
DFMD1 Door Frame Metal Detector Walk Through Security Scanner
- Model: Door Frame Metal Detector.
- Detection Zones: Single zone.
- Max Scanning Width: 27 inches.
- Range: Up to 2 meters detection field.
- Sensitivity: Adjustable (0–9).
- Alarm Mode: LEDs & sound (beep, light blinking, siren).
- Power Supply: 240 V AC, Operating Voltage 240 V, Current 5 A.
- Working Temperature: ‑20 °C to 75 °C.
- Weight: Approx. 40 kg.
- Power Source: Electric.
WDG1 HIPE Multi Zone Walk Through Metal Detector High Performance Security WEAPON DETECTOR GATE
- Product Name: HI‑PE Multi‑Zone Metal Detector.
- Detection: Multi‑zone (magnetic, non‑magnetic, mixed‑alloy).
- Zone Indication: Height-on-person LED bars.
- Alarms: Visual & audio, adjustable.
- Interfaces: RS‑232, Infrared; Ethernet/USB optional.
- Power: 100–277 V~, 47–63 Hz, 15 VA.
- Operating Temp: –20 °C to +65 °C.
- Storage Temp: –37 °C to +70 °C.
- Humidity: 0–95% non-condensing.
- Reliability: Self-diagnostic, no recalibration needed.
WDG2 HIPE Plus Walk Through Metal and weapon Detector gate Enhanced Security Screening System
- Product Name: CEIA HI‑PE Plus Walk‑Through Metal Detector.
- Detection: Multi‑zone with height-on-person localization.
- Zones: 60 (20 vertical × 3 lateral).
- Threats Detected: Magnetic, non-magnetic & mixed-alloy metals.
- Met‑Identity: Identifies threat composition.
- Security Programs: Up to 50 built-in, international & custom.
- Control: Chip card system with OTS auto-installation.
- Build: IP66-rated, dust/waterproof, washable panels.
- Alarm: Multi-zone visual bars, programmable tones & volume.
- Environment: Standard industrial conditions, extended ranges optional.
- Connectivity: RS‑232 / Infrared; optional Bluetooth, Ethernet, USB.
WDG3 Classic Walk Through Metal Detector Security Screening Metal Detection Gate
- Product Name: WDG3 Classic Walk-Through Metal Detector.
- Detection Type: Walk-through security metal detection.
- Sensitivity: Digitally adjustable (microprocessor-controlled).
- Control Unit: Built-in with hardware key protection.
- Synchronization: Automatic multi-unit linking (cable-free).
- Operating Temperature: –20 °C to +70 °C.
- Humidity: Up to 95% (non-condensing).
- Alarms: Visual & programmable audible alerts.
- Finish: Light grey (RAL 7040).
