Electronic Safety & Security

- Loop-powered addressable combined sounder + beacon

- 103 dB(A) audible alarm output

- Onboard short-circuit isolator

- 7 volume settings + 15 tone pairs

- 550 µA standby current

- Deep base form factor

- Available IP55 weatherproof variant

- Price mentioned per siren

- Model Number: AW-CSD311

- System Type: Conventional

- Detection Method: Photoelectric

- Sensor Type: Optical Sensing Chamber

- Power Supply Voltage: 9 – 32 VDC (non-polarized)

- Standby Current: ≤100μA @24VDC

- Alarm Current (LED On): ≤15mA @24VDC (with 1K Ohm resistance)

- Operating Temperature Range: -10°C to 49°C (14°F to 120°F)

- Humidity Range: 10% – 93% RH (non-condensing)

- Smoke Sensitivity: 1.06 ± 0.26% FT

- Height (with base): 48.2 mm / 2.2 in

- Diameter: 103 mm / 4.0 in

- Weight: 155 g / 5.5 oz

- Mounting Type: Ceiling

- Certifications: CE

- Origin: Guangdong, China

- Price mentioned per piece

- Brand: Global Fire

- Type: Thermal Detector

- System Type: Conventional

- Detection Method: Rate of Rise & Fixed Temperature

- Diameter: 102 mm

- Weight: 105 g

- Operating Voltage: 8 – 30 V DC

- Operating Temperature: -30°C to 70°C

- LED Indicator: Bi-color (Red/Green)

- Compatibility: Series 100 detector bases

- Installation: Ceiling Mount

- Price mentioned per piece

- Model: AW-CSS2166-4-11

- Type: Conventional

- Power Supply: DC 24V

- Alert Type: Sound + Strobe Light

- Adjustable SPL: Yes

- Origin: China

- Installation: Easy surface mounting

- Application: Fire Alarm Systems

- Price mentioned per piece

- Operating Voltage: DC 12V–24V

- Rated Current: ≦180mA

- Sound Pressure Level: 105dB ±3dB

- Working Temperature: -10°C ~ 50°C

- Material: ABS Plastic

- Weight: 81g

- Size: 82 × 82 × 33 mm

- Price mentioned per piece

Power Supply Voltage: 24VDC (Acceptable Range: 16~28VDC)

Normal Current: ≤ 20µA

Alarm Current: ≤ 30mA

Output Contact Rating: DC 30V / 0.1A Passive Contact; Contact Resistance ≤ 100mΩ

Activation Method: Manual Press of Plastic Dome

Reset Method: Key Reset (Rotate 90° to Right with Special Key)

Indicators: Fire Alarm: Red (On in Alarm)

Work Status: Red (Blinking)

Wiring Type: 2-wire, Non-polarized

Operating Temperature: -10°C to +55°C

Humidity: ≤ 95% RH (Non-condensing)

Material / Color: Plastic / Red

Dimensions: 90 × 90 × 34 mm (with base)

Mounting Hole Distance: 60 mm

- Standard Compliance: EN 54-12:2015 (LPCB / CE-CPR Certified)

- Power Rating: 20V to 28V DC

- Current Consumption: Standby: 23mA, Commissioning: 56mA, Alarm: 33mA

- Beam Type Reflective: Infrared with Laser Pointer

- Alignment Guide: Laser Beam & Nixie Tube Digital Display

- LED Indicators: Red (Fire), Yellow (Fault), Green (Alignment)

- Material / Color: ABS Plastic / White

- Dimensions: 190.87mm (L) × 126.87mm (W) × 91.96mm (H)

- Weight: 0.13 kg (Detector Only), 440g (With Base)

- Operating Temperature: -10°C to +50°C

- Humidity Range: 0% to 95% RH (Non-condensing)

- Ingress Protection: IP30 (Optional IP66 with glue seal – not EN54-12 approved)

- Compliance: EN 54-11:2001 + A1:2005

- Certifications: LPCB / CE-CPR

- Input Voltage: 24VDC (Range: 16V – 28V)

- Current Consumption: Standby: 0.6 mA / Alarm: 1.8 mA

- Protocol / Addressing: T&A, Range: 1 to 254

- Indicator: Front-Facing LED (Steady On when pressed)

- Glass Type: Non-breakable (No hammer required)

- Material / Finish: Fireproof ABS / Red Glossy

- Mounting: Surface Mount, Type A (Indoor Use)

- Dimensions: 99.7 mm × 57 mm

- Weight: 145 g (with base) / 90 g (without base)

- Operating Temperature: –10 °C to +50 °C

- Ingress Protection: IP43

- Humidity Range: 0 – 95% RH (Non-condensing)